1310nm Polarization Maintaining Patch-cord

1310nm Polarization maintaining (PM) optical patch cords are widely used in polarization sensitive fiber optical systems for transmission of light that requires the PM state to be maintained.

Polarization Maintaining Patch-cord (Polarization Maintaining jumper) have orthogonal “slow” and “fast” axes with different propagation constants. There is little coupling between the polarization modes, therefore, light launched on one axis would propagate on that axis. It features high extinction ratio as a result of very accurate active alignment between PM Major Axis and the connector key.

We provide PM patch cords at different wavelengths (from 350nm to 2100nm). Those patch cords are made using best-known PM optical fibers (such as Fujikura PM Fibers or Nufern PM Fibers) and first-class quality optical fiber connectors. Our PM patch cord features high extinction ratio, low insertion loss, high return loss and long term reliability. Various PM fiber and connectors are available.

If you do not see a standard polarization maintaining patch cords that meets your needs, we welcome the opportunity to review your desired specification and quote a custom polarization maintaining patch cords.DK Photonics can respond to custom requirements with short lead times.

fc-apc-conical-step-panda-pm-fiber-cross-section-what-is-fast-axis-and-slow-axis

Performance Specifications

PARAMETERS		UNIT	VALUES
Connector type		–	FC, SC, LC
Test wavelength		nm	1310
Operating Wavelength		nm	1270- 1650
Cutoff Wavelength		nm	1130-1270
Grade		–	S	P	A
Insertion loss		dB	≤0.2	≤0.3	≤0.5
Extinction ratio		dB	≥26	≥23	≥20
Return loss	PC	dB	≥50	≥45	≥40
	APC	dB	≥60	≥55	≥50
Fiber Type		–	Fujikura SM13-PS-U25A
Mode Field Diameter		µm	9 ± 0.5 µm @1300 nm
Repeatability		dB	≤0.2
Changeability		dB	≤0.3
Optical Power		mW	≤300
Durability		times	≥1000
Operation Temperature		℃	-5 to 75
Storage temperature		℃	-40℃ ~ + 85 ℃

Above specification may change without notice. Operating wavelength range based on fiber cutoff wavelength.
FC Connector key width: Narrow (2.0 mm).
Power transmits through the connector less than 2W. The default connector key is aligned to slow axis.
ER will be 2dB lower when use Nufern PM fiber.
The default length accuracy is +/-5CM, please let us know if you have special requirements.

Package Dimension

PM fiber patchcord

PS: The default length accuracy is +/-5CM, please let us know if you have special requirements

Order information

P/N: PMPC-①-②-③-④-⑤-⑥-⑦ (PMPig-①-②-③-④-⑤-⑥-⑦: for PM fiber pigtail with only 1 connector)

When you inquire, please provide the correct P/N number according to our ordering information, and attach the appropriate description would be better.

①	②	③	④	⑤	⑥	⑦
Wavelength	Grade	Connector key Alignment	Fiber Type	Pigtails Diameter	Fiber Length	Connectors
13:1310nm XX: Others	S:S Grade P:P Grade A: A Grade	S: Slow Axis(default) F: Fast axis	XXX(fiber name)	25:250μm 90:900μm 20:2.0mm 30:3.0mm XX: Others	05:0.5m 10:1.0m 15:1.5m XX: Others	FP: FC/PC FA: FC/APC SP: SC/PC SA: SC/APC LP: LC/PC LA: LC/APC XX: Others

Part Number Example: PMPC-13-P-S-P13-90-20-FA

Description: 1310nm Polarization Maintaining patchcord, P grade, PM1300 panda fiber, Slow Axis Connector Key Alignment, with 0.9mm OD loose tube, 2m fiber length, and FC/APC connectors at all ports.

Ordering Information for Custom Parts:

If you need to customize other specifications, please provide detailed description for your requirement.

Product

PM Patch-cord

Products