Erbium-doped Fiber Booster Amplifier in Micro Package

Optical Parameter	Unit	Typical Values	Remark
Wavelength Range	nm	1530~1565	C-band
Input Power	dBm	-6~+3
Saturated output power	dBm	10/13/17/20	@-3dBm input
Noise	dB	≤5.0	@-3dBm input
Polarization Dependent Gain	dB	≤0.3
Polarization Mode Dispersion	ps	≤0.5
Input/output Isolation	dB	>35
Optical power monitoring	–	Output optical power monitoring
Fiber Type	–	SMF-28e	1.0m length
Optical Connector	–	FC/APC
Working mode	–	Automatic current control (ACC) / Automatic power control (APC)	*Note 1

Electrical and environmental parameters	Module
Control Mode	RS232 or TTL serial communication
Communication Interface	XH2.54-4PIN
Power Supply	5V DC, <10W
Dimensions	50(W)×50(D)×15(H)mm
Operation Temperature Range	-5~+35°C
Operation Humidity Range	0~70%

*Note 1:

ACC mode: Automatic current control: the EDFA pump working current is set by the user and automatically locked by the EDFA to achieve a constant pump current. When the input optical power fluctuates, the output power will also fluctuate accordingly, which is applicable to all EDFA models.
APC mode: Automatic power control mode, where the user sets the signal light output power of the EDFA. Based on the output power monitored by the PD, the EDFA automatically controls and adjusts the pump current to achieve stable output signal. In APC mode, the user can adjust the output power within a range of 10% to 100% of the maximum output power. The advantage of APC mode is that when the input optical power fluctuates, EDFA will minimize the fluctuation of output power as much as possible.

Erbium-doped Fiber Booster Amplifier in Micro Package for C-band

If you need to customize other specifications, please provide detailed description for your requirement.

Fiber Amplifier