• About Us
  • News & Events

Product

                   

CPS / Mode Field Adapter

Products

2.0um Cladding Power Stripper

2.0μm Cladding Power Stripper is use in high-power fiber lasers and amplifiers need to be able to handle substantial optical powers. It needs to be ensured that these powers are absorbed in a sufficiently widespread region, and that the generated heat can be removed safely, without damaging the mode stripper or any surrounding parts.

Features

  • Low Insertion Loss
  • High Power Handling
  • High Power Absorption
  • PM and Non-PM are available
  • Fiber can be customized
  • High Reliability
  • Excellent Temperature Stability

Applications

  • Fiber amplifier and laser systems
  • Cladding-mode-free high power beam delivery
  • ASE stripping
  • Industrial/Biomedical/Telecom/Metrology
  • Life Science/Imaging/Quantum optics
2.0μm Cladding Power Stripper is use in high-power fiber lasers and amplifiers need to be able to handle substantial optical powers. It needs to be ensured that these powers are absorbed in a sufficiently widespread region, and that the generated heat can be removed safely, without damaging the mode stripper or any surrounding parts.
In fiber laser, the pump energy is absorbed along with doped fiber, transforming into signal energy, but pump cannot be absorbed completely, the residual part in outer cladding is no need, even dangerous for downstream components, with CPS can effectively “strip off” residual pump and signal which transmit back in clad, meantime keeps the amplified signal unaffected.
We can provide CPS with all kind of Double Clad fiber, cladding power up to 500W. If you do not see a standard CPS that meets your needs, we welcome the opportunity to review your desired specification and quote a custom CPS. Requests for custom fiber type, different wavelengths and handling power of operation or other specific needs will be readily addressed.

Performance Specifications

PARAMETERS
UNIT
VALUES
Center Signal Wavelength
nm
2000
Operating Wavelength-Pumps
nm
800~1000
Cladding attenuation(min)
dB
18~20
Type. Insertion Loss (at 25℃)
dB
0.05
Max. Insertion Loss (at 25℃)
dB
0.20
Cladding Power Handling(Stripping Power)
W
10, 20, 30…
Fiber Type In/Out
/
 Double Clad fiber
Pigtail Length
m
0.8 or other
Operation Temperature
0 ~ +50
Storage Temperature Range
-20 ~ +75

General Configuration for CPS:

WORKING WAVELENGTH(NM)
INPUT/OUTPUT FIBER
SIGNAL IL
MIN. STRIPPING EFFICIENCY
MAX. POWER STRIPPING
1950~2050
10/130µm,NA0.15/0.46
≤0.2dB
20dB
30W
1950~2050
25/250µm,NA0.09/0.46
≤0.2dB
20dB
100W
1950~2050
25/400µm,NA0.09/0.46
≤0.2dB
20dB
100W
Remark:
  1. Other configuration can be customized. We can build CPS on every double clad fiber,
  2. For stripping power≥100W and some small core fiber CPS, will need water cooling.
  3. All CPS default with DK Logo, bare fiber, 0.8m length of pigtail, please contact us for special request.
  4. When we refer to CPS power, we generally refer to the power in the fiber cladding that CPS needs to strip off. This power needs to be dissipated or derived from the package. So please give the exact stripping power level you need.

Package Information

Package Type(Total strip power)
P2(<20W)
P3(<40W)
P4(<70W)
P5(<150W)
P6(<800W)
Dimensions (mm)
65x12x7
80x12x8
100x15x10
120x30x20
120x42x30 (Water cooling)
  1. Due to ongoing design improvements, the package size is subject to change. According to the different configuration, power handling, and fiber core diameter, we will choose the appropriate package size. Please contact DK Photonics for confirmation.
  2. Device package must be mounted onto heat sink (active cooling is suggested) with thermal paste for high power.
Download Drawing in PDF:Pump and Signal Combiner

Order information

P/N: CPS-①-②-③-④

When you inquire, please provide the correct P/N number according to our ordering information and attach the appropriate description would be better. For high power applications, we recommend direct splicing without connectors.
Signal wavelength
Power Stripping
Fiber Type
Fiber Length
2000:2000nm
XX: Other
10:10W
20:20W
30:30W
XX: Other
XXX (fiber code)
10:1.0m
XX: Other
Part Number Example: CPS-2000-20-10/130/15D-10

Description: 2000nm Cladding Power Stripper – 20W Power Stripping, 10/130um, NA0.15/0.46 DC fiber, with 1.0m length bare fiber pigtails.

Ordering Information for Custom Parts:

If you need to customize other specifications, please provide detailed description for your requirement.