• About Us
  • News & Events
Contact Us

Product

                   

PM Band Pass Filter

Products

1030nm PM Band Pass Filter

The 1030nm PM Band-pass Filter is a micro-optics device based on environmentally stable thin-film filter technology. It is used to block out unwanted noise signals in fiber amplifier or fiber laser systems. The components are characterized with high isolation, low insertion loss, high return loss, excellent environmental stability and high-power handling capability. They are ideal for fiber amplifiers, fiber lasers, and high-speed communication system and instrumentation applications.

Features

  • Low Insertion Loss
  • High isolation
  • High Extinction Ratio
  • High power handling
  • High stability & Reliability

Applications

  • Fiber lasers
  • Fiber amplifiers

The 1030nm PM Band-pass Filter is a micro-optics device based on environmentally stable thin-film filter technology. It is used to block out unwanted noise signals in fiber amplifier or fiber laser systems. The components are characterized with high isolation, low insertion loss, high return loss, excellent environmental stability and high-power handling capability. They are ideal for fiber amplifiers, fiber lasers, and high-speed communication system and instrumentation applications.

Performance Specifications

PARAMETER UNIT SPECIFICATION
Center Wavelength nm 1030
Max. Pass bandwidth@0.5dB nm 2 6
Max. Stop bandwidth@25dB down nm 6 10
Max. Insertion Loss of Pass Band dB 0.8
Min. Extinction Ratio Type B dB 20

Type F

 dB 22
Min. Return Loss dB 50
Fiber Type – PM980-XP fiber, or other
Max. Power Handling W 0.3, 1, 2, 3, 5, 10
Max. Tensile Load N 5
Operating Temperature ℃ -5 – 75
Storage Temperature ℃ -40 – 85
Dimensions mm   Ф5.5×L35
  1. Above specifications are for device without connector.
  2.  “B” for Both axis working, “F” for Fast axis blocking, Integrated polarizer.
  3. For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower, ER (PM fiber) will be 2dB lower. Power transmits through the connector less than 2W, connector key is default aligned to the slow axis.
  4. For >10W high power applications, we will use heat sink package, contact DK Photonics for details.
  5. Since the function of the BPF is to be blocked unwanted noise signals, the blocked light remains in the interior of the housing, so we do not recommend applying it to too high power or adding reflection port to reflect the blocked light.
  6. Other center wavelengths and bandwidths can also be customized, but MOQ is required, please contact us.

Package Dimension

PM Band Pass Filter

  1. The default is without a reflective port.If the power to be blocked is relatively high, it is recommended to have a reflective port to guide the energy out of the shell.
  2. Due to ongoing design improvements, the package size is subject to change.
  3. For high power applications, we will use heat sink package, contact DK Photonics for details. Please contact DK Photonics for confirmation.

Order information

P/N:PMBPF-①-②-③-④-⑤-⑥-⑦-⑧

When you inquire, please provide the correct P/N number according to our ordering information and attach the appropriate description would be better. If need any connector, we do not recommend choosing a 250μm bare fiber pigtail.
① ② ③ ④ ⑤ ⑥ ⑦ ⑧
Port Wavelength Pass bandwidth Axis Alignment Power Handling Pigtails Diameter Fiber Length Connector
101:1×1(default)
102: 1×2(With reflect unwanted signals port)
 30:1030nm
2:2nm
6:6nm
B: Both axis working
F: Fast axis blocking
L:<0.3W
1:1W
2:2W
25:250μm bare fiber
90:900μm Loose Fiber
XX: Others
05:0.5m
08:0.8m
10:1.0m
XX: Others
00: None
FP: FC/PC
FA: FC/APC
LA: LC/APC
XX: Others
Part Number Example: PMBPF-101-30-2-B-L-25-10-00

Description: 1030nm PM Band Pass Filter, 1×1,2nm pass bandwidth, 300mW power, both axis working ,1.0m PM980 fiber, with bare fiber, no connectors at all ports.

Ordering Information for Custom Parts:

If you need to customize other specifications, please provide detailed description for your requirement.