1064nm Tap Coupler/Isolator Hybrid Combination

DK Photonics’s 1064nm Tap Coupler/Isolator Hybrid Combination is a combination of a tap coupler and an isolator in a compact package. All input and output fibers are polarization independent. This product has an extremely a very stable tap-coupling ratio, high isolation, and hight return loss. This product offers integrated solution to fiber amplifier application by combining more functions into a very compact package.

Performance Specifications

Parameter	Unit	Values
Stage of Isolator	–	Single Stage
Signal Central Wavelength (λ c)	nm	1064
Signal Wavelength Range	nm	+/-5
Max. Signal Excess Loss, λ c, @ 23℃	nm	3.2
Min. Signal Isolation, λ c, @ 23℃(Isolator)	nm	32
Tap Ratio	%	1~50
Tap Channel Typ. Loss	dB	19.0~2.15(1% tap)
Max. PDL	dB	0.15
Min. Return Loss	dB	50
Max. Power Handling (CW)	mW	200
Max. Peak Power for Pulse	kW	1, 5,10
Max. Tensile Load	N	5
Fiber Type	–	1060-XP fiber or specified
Operating Temperature	℃	-5 to +70
Storage Temperature	℃	-40 to +85
Package Dimensions	mm	Ø5.5 x L35

Above specifications are for device without connector,specifications may change without notice.
For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower and.Power transmit through the connector less than 2W.
Forthis 1030nm Isolator,Due to high IL, it is recommended to use average power of <50mW. If you need higher handle power, please look for our TGG based High power isolator.
If there is pulse application, please be sure to inform us of pulse energy and peak power.

Package Dimension

Tap Coupler/Isolator Hybrid Combination

PS: For forward tap, signal wavelength is polarization dependent. For backward tap, signal wavelength is Polarization independent.

Order information

P/N: TIH-①-②-③-④-⑤-⑥-⑦-⑧

When you inquire, please provide the correct P/N number according to our ordering information and attach the appropriate description would be better. If need any connector, we do not recommend choosing a 250μm bare fiber pigtail.

①

②

③

④

⑤

⑥

⑦

⑧

Wavelength

Stage

Optical Power

Tap Ratio

Tap Configuration

Pigtails Diameter

Fiber Length

Connector

64:1064

S: Single Stage

L: Refer to the above table

01:1% Tap

02:2% Tap

05:5% Tap

F: Forward Tap

B: Backward Tap

25:250μm bare fiber

90:900μm loose tube

XX: Others

05:0.5m

10:1.0m

15:1.5m

XX: Others

00: None

FP: FC/PC

FA: FC/APC

XX: Others

Part Number Example: TIH-64-S-L-01-B-90-10-FA

Description: 1064nm Tap Coupler/Isolator Hybrid Combination, single stage isolator, 200mW, 1% tap, Backward Tap, with 0.9mm OD loose tube, 1.0m fiber length, and FC/APC connectors at all ports.

Ordering Information for Custom Parts

If you need to customize other specifications, please provide detailed description for your requirement.

Product

Coupler Isolator Hybrid

Products