1900~2050nm High power SM fiber Fused Coupler

DK Photonics uses unique fusing technique to build 1900~2050nm High power SM fiber Fused Coupler are used to split off a portion of light to allow for optical monitoring and feedback. These devices are used extensively in fiber amplifier power control, and in transmission equipment for performance monitoring and feedback control. High power SM fiber Fused Coupler is widely used for High Power Fiber Laser and High-Power Fiber amplifier.

If you do not see a standard High power SM fiber Fused Coupler that meets your needs, we welcome the opportunity to review your desired specification and quote a custom fused Coupler. Requests for custom fiber pigtails, different wavelengths, tap Ratio and handling power of operation or other specific needs will be readily addressed.

Performance Specifications

PARAMETER	UNIT	VALUES
Grade	–	P
Configuration	–	1×2 or 2×2
Operating wavelength	nm	1900,1950,2000,2050, others on request
Operating bandwidth	nm	± 15
Coupling Ratio	%	1%~50%
Typical excess loss	dB	0.10
Max. excess loss	dB	0.20 (0.4dB for dual cladding fiber)
Max. Insertion Loss	dB	IL related to CR
PDL	dB	≤0.1
Return Loss	dB	≥50
Directivity	dB	≥55
Max. Optical Power (CW)	W	10,20,30
Fiber Type	–	SMF-28e, SM1950, SM-GDF-10/130-15M or other
Operating Temperature	℃	-20~+75
Storage Temperature	℃	-40~+85
Package Dimension	mm	60x5x5(10~20W), 60x12X8(30)

Above specifications are for device without connector.
For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower. Powers transmit through the connector less than 2W.

Package Dimension

For Power <10W:

For Power 10~20W:

For >20W:

*Due to ongoing design improvements, the package size is subject to change. For high power applications, we will use heat sink package, contact DK Photonics for details. Please contact DK Photonics for confirmation.

Order information

P/N: HPFBTC①-②-③-④-⑤-⑥-⑦-⑧-⑨-⑩

When you inquire, please provide the correct P/N number according to our ordering information and attach the appropriate description would be better. If need any connector, we do not recommend choosing bare fiber pigtail. For high power applications, we recommend direct splicing without connectors.

①	②	③	④	⑤	⑥	⑦	⑧	⑩
Grade	Port	Wavelength	Power Handling	Coupling Ratio(%)	Fiber Type	Pigtails Diameter	Fiber Length	Connector
P: P Grade	102:1×2 202:2×2	1900:1900nm 1950:1950nm 2000:2000nm 2050:2050nm XX: Others	10:10W 20:20W 30:30W 50:50W	50:50/50 40:40/60 30:30/70 20:20/80 10:10/90 05:5/95 02:2/98 01:1/99 XX: Others	S28: SMF-28e S19: SM1950 XXX: fiber code	25:250μm 90:900μm XX: Others	05:0.5m 10:1.0m 15:1.5m XX: Others	00: None FP: FC/PC FA: FC/APC XX: Others

Part Number Example: HPFBTC -P-102-1950-20-50-S19-25-10-00

Description: 2000nm high power single mode fused coupler, P grade,1×2, 20w handling power,50:50, SM1950 fiber, with bare fiber,1.0m length fiber pigtails, no connectors at all ports.

Ordering Information for Custom Parts:

If you need to customize other specifications, please provide detailed description for your requirement.

Product

High Power Components

Products