• About Us
  • News & Events

Product

                   

Fiber Amplifier

Products

Erbium-doped Fiber Pre-Amplifier for C-band

C-band (* Note 1) erbium-doped fiber small signal amplifier (PA, Pre-Amplifier) is an amplifier specifically designed for weak optical signals in the C-band range of -45dBm to -25dBm. The typical gain of small signals is as high as 35~45 dB, and it has a low noise index. Used before the photodetector to improve its ability to detect weak light signals.

 

*Note 1: This EDFA product can be used for amplifying signals of any single or multiple wavelengths within the working wavelength range, but the gain spectrum flatness is not considered when inputting multi wavelength signals. As shown in the figure on this page, the EDFA-PA-35 small signal amplifier can achieve high gain amplification for input signals of different wavelengths in the C-band (multiple wavelengths are not simultaneously input to the EDFA in the figure). When the input power of a single wavelength is -35dBm, the effective gain is greater than 35dB, and the amplified signal background noise ratio is greater than 30dB.

Features

  • Wide wavelength range
  • High gain
  • Low noise

Applications

  • Fiber Communications
  • Fiber Laser
  • Fiber Sensors

Performance Specifications

Optical Parameter Unit Typical Values Remark
Model EDFA-PA-35 EDFA-PA-45
Wavelength Range nm 1530~1565nm C-band
Input Power dBm -35~-25 -45~-25
Gain factor dB 35@-35dBm input 45@-45dBm input 35@-25dBm input
Noise dB ≤4.5
Polarization Dependent Gain dB ≤0.3
Polarization Mode Dispersion ps ≤0.5
Input/output Isolation dB >35
Optical power monitoring Output optical power monitoring
Fiber Type SMF-28e 1.0m length
Optical Connector FC/APC
Working mode Automatic current control (ACC) *Note 2

*Note 2: ACC mode: Automatic current control, the EDFA pump working current is set by the user and automatically locked by the EDFA to achieve a constant pump current. When the input optical power fluctuates, the output power will also fluctuate accordingly, which is applicable to all EDFA models.

Package Dimension

Ordering Information

P/N: ①-②-③-④-⑤-⑥

When you inquire, please provide the correct P/N number according to our ordering information, and attach the appropriate description would be better.

EDFA Operation Wavelength Amplifier type Gain(dB) Fiber Type Package Type
C: C-band PA: Small signal amplifier 35:35dB@-35dBm

45:45dB@-45dBm

SM: SMF-28e M: Module

B: Desktop

Ordering Information for Custom Parts:

If you need to customize other specifications, please provide detailed description for your requirement.